Sophie head and her freshly milled exotic wood boards.

 A danish cord seat is born!

Der finished benchen,
 impractically on top of one's workbench.

After something like 6 months, much of which spent just walking by the bench and running my fingers along its rough parts, the bench is finally now complete!

I started with a design from FineWoodWorking.com, which was a designed made as a capstone project from a student graduating from a fine furniture making school. I should have clued in on that before I started making the joinery: I've never made joints more intricate than what is in this bench. For those of you curious, the strength in these small joints comes from the fact that the tenons split into two parallel tenons with a 3/16" space in between, and that the inner tenon is shorter than the outter one on all four legs.

Regardless, it just tool more time to get them done and certainly gave me a chance to hone my hand joinery skills (and my hand tool honing skills as well). Cherry is a great species of hardwood to work with: I'm going to get back to it for another project soon (health allowing). I dealt with a bit of heterogeneity in the heartwood/sapwood front, but I oriented the prices such that the sapwood will not be visible when the bench will be sitting where it is meant to in the lobby. Now, if this is not customizing furniture, nothing ever will.

The danish cord weave turned out well. 

Weaving was another challenge. I considered getting it done professionally, but in the end it wasn't that bad. The seat is very comfortable, and working with woven cord fibers was actually easier than I thought. Sophie, my daughter extraordinaire, helped with the second part yesterday and got her share of blisters to prove it. I'm very glad that she is interested in working with wood. I'll show her how to do relief carving as a payment for her hard work (not that I know a lot about it, but I'll share the little that I do).

It took about 7 hours to weave the whole thing.

Finishing was my simple recipe: some solvent-free boiled linseed oil and three coats of rubbed-on polyurethane to protect against wet boots and dripping jackets.

Sophie and Mr. Bandsaw.

Back at it!

After weeks of moving, taking down the tools and subsequently setting them up again, I began working on hardwood again tonight. I'm making a Hayrake Table, which design from from an editor of the Fine Woodworking magazine.  The modification to the basic design is that the structure is made of hard maple while the table top is still made of quatersawn white oak. This will be more consistent with the China Cabinet and chairs that are going to be in the dining room. Another reason why this is so is because I couldn't source anything but 4/4 stock of oak in this cut style, and thus it would have made it very tedious to prepare the legs and stretchers (it calls for 8/4 and even some 12/4 stock).

I spend the best of 1-2 hours with my daughter doing the initial milling of the legs (with 12/4 stock), which was a good work-out for my new roller stand and a good test for the ducts going to the dust-collector. Everything seems to be working as expected. Life is good.

Tomorrow, I'm finally getting a 10" contractor saw from busybee.  The only tool not yet delivered is the DW618K 2HP router that will be the workhorse for a router table. When will this router table be made? Good question, but it is good to know that the most critical component will be in the shop.